MM-380A
8. Operation Screens
8-8
e.
WAVEFORM Screen (Vertical Axis)
No.
Item
Description
(1)
SCH.#
Shows the measurement condition number used (1 to
127). On the other hand, you can change conditions by
selecting this field with the encoder and turning the
encoder clockwise or counterclockwise. The details of the
conditions can be set using the SETUP (1) to (3) screens.
(2)
Waveform
Shows the waveforms of four items on the grid. Waveform
display items can be selected in the VIEW screen.
(3)
Grid spacing
Shows the grid spacings for the four waveforms shown on
the grid.
(4)
Measured
values
(M-VALUE)
Shows the measured values of five (5) items.
Measurement items can be selected in the VIEW screen.
The function keys above operation buttons A to D show
the item names for the displayed waveforms. The
displayed item names vary depending on the selection of
waveform display items.
(In the above screen example, current (CURR), voltage
(VOLT), power (POWER) and resistance (RESIST) are
selected as waveform display items. Thus, these four
items are shown on the function keys.)
Pressing one of operation buttons A to D makes it possible
to adjust the grid spacing for the vertical axis (Y axis) of
the corresponding item. In this condition, turn the encoder
clockwise or counterclockwise. This increases or
decreases the grid spacing of the waveform’s vertical axis
(Y axis). Pressing that operation button (A to D) again
locks the grid spacing for the waveform’s vertical axis (Y
axis).
(5)
Function keys
Return
(BACK)
Pressing operation button E returns the display
to the WAVEFORM screen.
(2)
(5)
(1)
(3)
(4)
