Schwinn Crewmaster Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 38

Schwinn Crewmaster Скачать руководство пользователя страница 6

6

Moving and Storing the Machine

When the machine is not in use, it should be stored in an appropriate space away from foot traffic. To conserve space, you may fold the Seat

Rail Assembly and secure it with the Seat Rail Locking Pin.

For safe storage of the machine, remove the batteries. Place the machine in a secure location away from

children and pets.

1. Move the Seat to the front of the Seat Rail.
2. Pull the Seat Rail Locking Pin (M)

to release and raise the Seat Rail

Assembly to the folded position. Make

sure that you have a secure grip when

raising the Seat Rail Assembly.

Stay clear of the movement

path of the Seat Rail

Assembly.

M

3. Release the Seat Rail Locking Pin to engage the support tube. You will hear an audible

clicking noise. Be sure that the Seat Rail Locking Pin is fully engaged. If it is not fully

engaged, injury to the user can occur.

The machine may be moved by one or more persons depending on

their physical abilities and capacities. Make sure that you and others

are all physically fit and able to move the machine safely. Use proper

safety precautions and lifting techniques.

4. Grasp one of the curved Support Plates (V) and the Lift Handle (L). Carefully tilt the machine

onto the Transport Rollers (F).

5. Holding the Lift Handle (L), push the machine into position.

NOTICE:

Be careful when you move the machine. Abrupt motions can affect the computer

operation.

6. Carefully lower the machine to the floor and do not let it drop from any height.

L

F

V

«
...
4
5
6
7
8
...
»

Содержание Crewmaster







































Отзывы:

Нет отзывов