manualshive.com logo in svg

Schwinn Crewmaster, Руководство по обслуживанию, Страница: 37 / 38

Поделиться
Скачать
Schwinn Crewmaster Скачать руководство пользователя страница 37

37

Note:

  Your machine may not match the image. For reference only.

1.    Move the Seat to the front of the Seat Rail. 
2.    Pull the Seat Rail Locking Pin (M) to release and raise the Seat Rail 

Assembly to the folded position.  Make sure that you have a secure 

grip when raising the Seat Rail Assembly.

 Stay clear of the movement path of the Seat Rail 

Assembly.

3.    Release the Seat Rail Locking Pin (M) to engage the support tube. 

You will hear an audible clicking noise. Be sure that the Seat Rail 

Locking Pin is fully engaged. If it is not fully engaged, injury to the 

user can occur.

NOTICE:

   The Stabilizer Foot assembly contains grease which can stain. 

It is advisable to protect the floor or carpet.

4. Fully loosen the Adjustment Handle (A) and remove. Be aware that the 

internal spring will recoil suddenly when the Adjustment Handle is fully 

loosened. 

5.    Grasp one of the curved Support Plates (S) and the Lift Handle 

(L). Carefully tilt the machine in order to remove the base (B) of the 

Stabilizer Foot. 

NOTICE:

  Do not crimp the cables. This step may require two people.

M

B

A

S

L

Содержание Crewmaster







































Отзывы:

Нет отзывов