manualshive.com logo in svg

Schwinn AD6, Руководство по обслуживанию

Поделиться
Скачать
Schwinn AD6 Скачать руководство пользователя страница 2

2

Important Safety Instructions and General Troubleshooting 

Information for the AD6 Airdyne

®

 Upright Bike

8003112.010117.C

Service Procedures

Important Safety Instructions 

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious 

injury. Read and understand all Warnings on this machine.

Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. 

Read and understand all Warnings on this machine.

  To reduce the risk of electrical shock or usage of the equipment, always remove the batteries from the 

machine and wait 5 minutes before cleaning, maintaining or repairing the machine.

 

•  Keep bystanders and children away from the product being serviced at all times.
•  Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.
•  Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance 

steps involving these components. Do not try to do heavy or awkward steps on your own.

•  Use only replacement parts and hardware that are supplied or approved by Nautilus.  Failure to use Nautilus-approved replacement 

parts can adversely affect the safety and functionality of the equipment creating a risk to users.

•  Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing 

maintenance or replacing components.  If necessary, request replacement warning stickers or placards from Nautilus customer 
service.

•  Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.
•  Do not put the machine back in service until all shrouds, instructions, warning labels and correct functionality have been verified 

and tested for correct performance.

•  This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close range. Users 

may come into proximity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of 
these devices, such as a pacemaker, it is important that you consult with your medical provider in connection with the use of this 
equipment. Please consult the “Safety Warning Labels and Serial Number” section to determine the location of the magnets on this 
product.

NOTICE:  

This document provides important safety instructions, adjustments, and general troubleshooting information for the maintenance of the Schwinn

®

 AD6 

Airdyne

®

 Upright Bike. 

If you need assistance, please call 

Schwinn

 Customer Service at 1-800-605-3369.

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and 

understand all Warnings on this machine.

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed in China | © 2013 Nautilus, 

Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Schwinn and Airdyne are trademarks owned by or licensed to Nautilus, Inc. 

Polar

®

is a trademark of its respective owner.

Содержание AD6



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды