Schwinn 510T страница 39 Скачать руководство пользователя

Страница: 39 / 48

NOTICE:

To prevent damage to the finish of the machine or Console, do not clean with a petroleum based solvent.

Do not apply too much moisture to the Console.

Adjusting the Belt Tension

If the walking belt starts to slip during use, it is necessary to adjust the tension. Your treadmill has tension bolts at the rear

of the treadmill.

1. Before you adjust the belt tension, start the treadmill by pushing the START button.

Be sure not to touch the walking belt or step on the power cord. Keep bystanders and children away from

the product you are servicing at all times.

2. Use a 6 mm hex key to turn the right and left belt adjustment bolts clockwise a 1/2 turn, first one bolt and then the

other bolt until the belt does not slip.

3. After you adjust each side the 1/2 turn, do a test to see if the belt stopped slipping. If the belt still slips, do steps 2 and

3 again.

If you turn one side more than the other, the belt will move away from that side of the treadmill and may need realignment.

NOTICE:

Too much tension on the belt causes unnecessary friction and wears the belt, motor and electronics.

4. Push PAUSE/STOP twice to stop the walking belt and end the Quick Start workout.

Aligning the Walking Belt

The walking belt should be centered on your treadmill at all

times. Running style and a non-level surface can cause the

belt to move off center. Minor adjustments to the 2 bolts at the

rear of the treadmill are necessary when the belt is off center.

1. Push the START button to start the walking belt.

Be sure not to touch the walking belt or step on the

power cord. Keep bystanders and children away

from the product you are servicing at all times.

2. Stand at the rear of the treadmill to see which direction

the belt moves.

3. If the belt moves to the left, turn the left belt adjustment

bolt 1/4 turn clockwise and the right belt adjustment bolt

1/4 turn counterclockwise.

If the belt moves to the right, turn the left adjustment bolt

1/4 turn counterclockwise and the right adjustment bolt

1/4 turn clockwise.

4. Monitor the path of the belt for approximately 2 minutes. Continue to adjust the bolts until the walking belt is centered.

5. Push PAUSE/STOP twice to stop the walking belt and end the Quick Start workout.

Lubricating the Walking Belt

Your treadmill is equipped with a low maintenance deck and belt system. The Walking Belt is pre-lubricated. Belt friction

can affect the function and life of the machine. Lubricate the belt every 3 months or every 25 hours of use, whichever

comes first. Even if the treadmill is not in use, silicone will dissipate and the belt will dry out. For the best results, lubricate

the deck periodically with a silicone lubricant using the following instructions:

1. Turn off the power to the machine with the power switch.

2. Unplug the treadmill fully from the wall outlet, and remove the power cord from the machine.

6mm

Содержание 510T

















































Результаты поиска

Содержание 510T

Отзывы:

Похожие инструкции для 510T

Бренды по названию

Популярные бренды

Schwinn 510T, Руководство по сборке / Инструкция пользователя

Результаты поиска

Содержание 510T

Отзывы:

Похожие инструкции для 510T

Бренды по названию

Популярные бренды