Schwinn 270i Recumbent Bike, Инструкция по сборке

Страница: 5 / 42

5
SpecIfIcatIonS
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 189.5 cm x 280.5 cm ( 74.6” x 110.5” ).
Basic Assembly Tips
Follow these basic points when you as -
semble your machine:
• Read and understand the “Important
Safety Instructions” before assembly.
• Collect all the pieces necessary for
each assembly step.
• Using the recommended wrenches,
turn the bolts and nuts to the right
(clockwise) to tighten, and the left
(counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly lift
and look through the bolt holes to
help insert the bolt through the holes.
• The assembly can require 2 people.
133.3 cm
( 52.5” )
158.6 cm
( 62.5” )
67.5 cm
( 26.6” )
This product conforms to the applicable EN ISO 20957 International Standards for Stationary Training Equipment, Class H.
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.
2.81m ( 110.5” )
1.9m
( 74.6” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
0.6m
( 24” )
Maximum User Weight: 136 kg ( 300 lbs. )
Machine Weight: 39.3 kg ( 86.6 lbs. )
Total Surface Area (foot print) of equipment:
10705.5 cm
2
( 1662.5 inches
2
)
Power Requirements:
Operational Voltage: 220V - 240V AC, 50Hz
Operating Current:
0.4A
Regulatory Approvals: