22
EASY-MAG-Series | Version 2.01
Disposal, Recycling of old equipment
12 Disposal, Recycling of old equipment
In the interests of the environment, care must be taken to
ensure that all components of the machine are disposed
of in the proper and approved way.
12.1 Decommission
Disused devices must be taken out of service immedi-
ately in order to prevent later misuse and endangering
the environment or peole.
- Dispose of all environmentally hazardous fluids from
the old device
- If necessary, disassemble the welder into manageable
and usable assemblies and components.
- Supply the components and operating materials to the
appropriate disposal channels.
12.2 Disposal of electrical equipment
Electrical equipment contains a variety of recyclable ma-
terials and environmentally harmful components.
These components must be separated and properly dis-
posed of. If in doubt, contact municipal waste manage-
ment.
If necessary, the help of a specialized waste manage-
ment company can be used for the treatment.
12.3 Disposal via municipal collection points
Disposal of used electrical and electronic equipment
(Applicable in the countries of the European Union and
other European countries with a separate collection sy-
stem for these appliances).
The symbol on the product or its packaging indi-
cates that this product should not be treated as normal
household waste, but must be returned to a collection
point for the recycling of electrical and electronic equip-
ment. By helping to properly dispose of this product, you
are protecting the environment and the health of others.
Environment and health are endangered by improper
disposal. Material recycling helps to reduce the
consumption of raw materials. For more information
about recycling this product, contact your local commu-
nity, municipal waste management, or the shop where
you purchased the product.
13 Spare parts
13.1 Ordering spare parts
The spare parts can be obtained from the dealer or di-
rectly form the manufacturer. The contact details are in
chapter 1.2 Customer Service.
Specify the following key data for inquiries or when orde-
ring spare parts::
- Type of device
- Item number
- Position number
- Year of construction
- Quantity
- Desired shipping method (post, freight, sea, air, ex-
press)
- Shipping address
Spare parts orders without details given above can not
be considered. If the shipping method is missing, ship-
ping will be at the discretion of the supplier. Information
on the device type, article number and year of manu-
facture can be found on the type plate, which is attached
to the device.
Example
The solenoid valve for the EASY-MAG 171 welder must
be ordered. The solenoid valve has the number 10 in the
spare parts drawing 1.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (solenoid valve) and
marked position number (10) to the dealer or spare parts
department and provide the followin information.
Type of device:
Welding equipment EASY-MAG 171
Item number:
1081171
Spare parts drawing number:
1
Positions number:
10
The article number of your device:
Welding device EASY-MAG 171:
1081171
Welding device EASY-MAG 193:
1081193
Welding device EASY-MAG 213:
1081213
Содержание EASY-MAG 171
Страница 30: ...www schweißkraft de ...
