background image

 CLEANING AND MAINTENANCE

Page 27

PERIODIC INSPECTIONS

In addition to normal cleaning and 

maintenance:
•  Carry out periodic checks of touch controls. After 

the warranty expires, have an authorised service 

technician inspect the appliance every two 

years.

•  Repair any identified problems.
•  Carry out periodic maintenance of the cooktop.

IMPORTANT

All repairs and adjustments must be 

performed by a qualified technician or by an 

qualified installer.

Never apply a detergent on the hot cooking zone. 

Any traces of the detergent should be wiped 

off clean with a damp cloth before re-heating. 

Otherwise, it can be corrosive.
Warranty will be void if you do not follow the 

above guidelines! 

IMPORTANT

If the cooktop controls do not respond for 

whatever reason, turn off the main circuit 

breaker or disconnect the power and contact 

customer service.
In the event of breakage or chipping of the 

cooktop cooking surface, turn off and unplug 

the appliance. To do this, disconnect the 

power or unplug the appliance. Then refer 

the repair to Customer Service or a qualified 

technician.

Содержание INID77

































Отзывы: