Schweigen INID77, Инструкция по эксплуатации

Страница: 16 / 32

OPERATION
Page 16
Protective device: If the cooktop has been
installed correctly and is used properly, any
protective devices are rarely required.
Fan: protects and cools controls and power
components. It can operate at two different speeds
and is activated automatically. Fan runs until the
electronic system has sufficiently cooled down
regardless of the appliance or the cooking zones
being turned on or off.
Temperature sensor: The temperature of the
electronic circuits is continuously monitored by
a temperature sensor. If temperature is raised
beyond a safe level, the protection system will
reduce the cooking zone heat setting or shut down
the cooking zones adjacent to the overheated
electronic circuits.
Pan detection: sensor allows the cooktop to
detect pans placed on a cooking zone. Small objects
placed on the cooking zone (eg, spoon, knife, ring,
etc.) will not be recognised as pans and the cooktop
will not operate.
PAN DETECTOR
A pan detector sensor is installed in this induction
cooktop. The pan detector starts heating
automatically when a pan is detected on a cooking
zone and stops heating when it is removed. This
helps save electricity.
When a suitable pan is placed on a cooking zone,
the display shows the heat setting.
IMPORTANT
If a pan is not placed on a cooking zone or
the pan is unsuitable, the symbol is
displayed. The cooking zone will not operate.
If a pan is not detected within 90 seconds,
the cooking zone will be switched off.
Switch off the cooking zone using the touch
control sensor field rather than by removing
the pan.
Pan detector is not an on/off operation.
The induction cooktop is equipped with electronic
touch control sensor fields, which are operated by
touching the marked area with a finger.
Each time a sensor field is touched, an acoustic
signal can be heard.
IMPORTANT
When switching the appliance on or off, or
changing the heat setting, touch only one sensor
field at a time.
When two or more sensor fields are touched at
the same time, the appliance ignores the control
signals and may trigger a fault indication (with
the exception of Bridging, Timer, and Child Lock
operations).
When you finish cooking switch off the
cooking zone using the touch control sensor
fields and do not rely solely on the pan
detector.