Schweigen INID77, Инструкция по эксплуатации

Страница: 19 / 32

OPERATION
Page 19
1
2
3
3
3
4
5
6
7 8
9
10
11
5
3
CONTROL PANEL
Immediately after the appliance is connected to
electrical mains, all displays will light up briefly.
Your induction cooktop is then ready for use.
The induction cooktop is equipped with electronic
touch control sensor fields, which are operated by
touching with a finger for at least 1 second.
Touching the sensor field is accompanied by an
acoustic signal to acknowledge.
No objects should be placed on
the sensor fields (this could cause
an error). Touch sensor fields
should always be kept clean.
If none of the sensor fields are
touched within 10 seconds of
switching on the appliance,
the cooking zone switches off.
A cooking zone is active when its
display shows a digit or a letter.
This indicates the cooking zone
is ready for the heat setting to be
set or changed.
If none of the sensor fields are
touched within 10 seconds, the
appliance switches itself off.
SWITCH ON THE APPLIANCE
• To switch on the appliance touch and hold the
on/off sensor field (1) for at least 1 second.
• The appliance is switched on when all heat
setting displays (3) show “ ” and decimal point
is flashing.
SWITCH ON THE COOKING ZONE
Once the appliance is switched on using the on/off
touch sensor (1), select a cooking zone (3) within
the next 10 seconds.
1. When a cooking zone selection sensor field (3) is
touched, “ ”on the corresponding heat setting
indicator display will pulsate.
2. To select the desired heat setting, slide your
finger across the setting selection sensor field (2).
CONTROL PANEL
SENSOR FIELDS:
1. On/off sensor field
2. Heat setting selection sensor field
3. Cooking zone indicator
4. Timer display
5. Timer indicator light
6. Booster sensor field
7. Stop ’n’ go function sensor field
8. Keep Warm function sensor field
9. Child lock sensor
10. Child lock indicator light
11. Kitchen timer indicator light