Schweigen IN10EB, Инструкция по эксплуатации

Страница: 30 / 36

Page 30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
>>
INSTALLATION INSTRUCTIONS
ELECTRICAL CONNECTION
Warning: This appliance MUST be earthed.
This appliance should only be installed by qualified
persons.
The power supply must be accessible to allow
disconnection of the appliance in the installed
position.
A qualified electrician must install the appliance
with fixed wiring. For fixed wiring installation, a
means for all pole disconnection with at least 3mm
distance between contacts, must be incorporated
in the fixed wiring in accordance with the wiring
rules.
• Access to the electrical terminal is gained by
opening the terminal block cover at the rear of
the appliance (use a small flat head screwdriver).
• Once connection is made, close the terminal
box, ensuring that the cover is engaged on the
locking tabs.
2
1
ELECTRICAL TERMINAL BLOCK
230V 1N~
Live
(Red or Brown)
Neutral
(Black or Blue)
Earth
(Green/Yellow
or sleeving)
Cable clamp
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
WARNING
Ensure the electric cables do not pass near or come
into contact with surfaces reaching a temperature
above 75 °C.
ATTENTION
Disconnect the electric power supply before
performing technical assistance or maintenance
on the product.
In case of replacement of the electric cable, ensure
the use of an electric cable certified according to
Australian/ NZ Standards.
Use only flexible cables:
Type HO5VV-F 3G1.5