Schweigen IN10EB, Инструкция по эксплуатации

Страница: 19 / 36

Page 19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
>>
OPERATION
DURATION
You can program the appliance to turn off after
00:01h to 10:00h (with an accuracy of 1 minute).
When you set DURATION, the ECO function is also
active (as described in ECO function section), which
is indicated by the symbol.
Activate DURATION
Set Function Selector Dial to any function
(other than 0) to be able to set DURATION. Touch
and hold (you will hear a [confirmation] beep)
until
symbol starts flashing and the main time
display shows 00:00 flashing. Use Temperature/
Setting selection dial to set DURATION. Touch
to confirm. You will hear a [confirmation] beep. The
symbol will stop flashing. The display shows a
flashing indication: [current time + DU
1 minute]. Touch again to activate DURATION.
If you do nothing for 5 seconds, the function
activates automatically.
You will hear [end] beep when DURATION is set.
When DURATION starts the main time display
shows current time and symbol is shown. The oven
turns on. The remaining duration is counted down
as shown below.
Set function selector dial to 0 to cancel
DURATION.
Follow the same procedure to adjust DURATION
time.
End DURATION function
When DURATION has elapsed, the oven turns off
as if you set function selector dial to 0. You will
hear [end time] beep for about 1 minute.
The
symbol and time indication 00:00 will
flashing until you set function selector dial to 0.
When DURATION has elapsed you will not be able to
use any other function until you first set function
selector dial to 0. Touch to set DURATION
again.
Touch any control to silence the alarm.
DELAY START
You can delay start of the oven and set the END
TIME as needed. Based on the END TIME and
DURATION the appliance automatically calculates
Start Time. The appliance will automatically turn
on and off. END TIME can be set from [current time]
to 23h 59min and DURATION up to 10h with an
accuracy of one minute.
To set DELAY START function, first set DURATION.
Activate DURATION. Touch and hold to confirm
DURATION and
stop flashing and starts
flashing. [current time + DU1min] will
flashing on the display. Use Temperature/
Setting selection dial to set END TIME. Touch
or do nothing for 5 seconds to confirm. DELAY
START function activates and you will hear [end]
beep.
Once DELAY START is activated the main time
display shows the current time. The
and
symbols are on. The appliance counts down the
time remaining to start based on set END TIME and
DURATION. When the oven starts the
symbol
turns off and there is a countdown to END TIME.
Set function selector dial to 0 to cancel DELAY
START. The set temperature will be reset.
Follow the same procedure to adjust the settings.