7 Customer service and spare parts
EN Wall, ceiling and floor grinding machine WDS 250
WDS250‐en‐220909
20
5.
For further transport:
Secure or lash the grinding machine tight against shifting
and tipping according to regulation, transport to the respec
tive location and deposit.
For longer periods in transport or in storage, the grinding
machine needs to be covered to protect it against soiling.
7 Customer service and spare parts
In case of customer service queries, replacement parts or re
pairs, please contact the manufacturer of the grinding machine.
To ensure your queries are dealt with as quickly as possible,
always quote your grinding machine data (machine no. and
serial no.). These are located on the grinding machine’s type
plate.
Manufacturer: Schwamborn Gerätebau GmbH
Robert‐Bosch‐Straße 8
D‐73117 Wangen / Göppingen
Telefon:
+49 (0)7161 2005‐0
Telefax:
+49 (0)7161 2005‐15
E‐Mail:
URL:
http//:www.schwamborn.com
8 Declaration of conformity
Manufacturer:
Schwamborn Gerätebau GmbH
Robert‐Bosch‐Straße 8
D‐73117 Wangen
Germany
We hereby declare that the grinding machine WDS 250
complies with the provisions described in Directive 2006/42/EG (Machines)
The following harmonised standards apply:
EN 292‐1, EN 292‐2, EN 13857 (Safety of Machinery)
EN 62079 (Creating operating instructions)
It is forbidden to begin operating a modified or retrofitted machine before it has been determined that the modi
fied or retrofitted machine conforms to the above directives.
This declaration is no longer valid if the machine is modified or retrofitted without our prior consent and ap
proval.
The original operating manual with the Declaration of Conformity and translation into the respective European
national language is supplied with the machine.
Wangen, 15.07.2022
Eckart Schwamborn
Managing Director
