Schwaiger LWH 031, Инструкция по эксплуатации, Страница: 12 / 16

12
3. Final Installation and Operation
3.1 Final Installation
1. To complete the installation, simply slide the arm piece onto
the wall plate.
2. The plastic tab on the top of the wall piece should click, indi-
cating that the arm piece is secure.
3. If you need to remove the arm piece, push in on the tab and
slide the arm up.
4. For additional security and stability, tighten the security bolt
located on base of the arm piece using the Allen Wrench (F)
included in the hardware kit.
3.2 Operation and Adjustment
Note: Adjustment of your LCD may vary by model
On most models, the tilt angle of your LCD can be
adjusted by first loosening the gear joint that holds
the tilt in place. To do this, locate the adjustment
knob directly behind the LCD mounting point.
Loosen it by turning the knob counter-clockwise.
Adjust the tilt to the desired level and re-tighten the
knob. Other viewing adjustments can be made by
simple moving the arm into the desired position. If
you find that a joint is too difficult to move or does
not hold the LCD in place, you can adjust the tight-
ness of the joint. If your mount includes black ad-
justment knobs, turn a knob clockwise to tighten and
counter-clockwise to loosen. If your mount does not
have knobs, use the Allen Wrench (F) to tighten or
loosen the joint.