Schwaiger LWH 031, Инструкция по эксплуатации, Страница: 10 / 16

10
Hardware kit
50 mm (2x)
Wood Screw
A
Bubble Level System
E
S = 5 mm
Allen Wrench
F
M4 x 12 mm (4x)
Head Screw
B
M4 x 30 mm (4x)
Head Srew
C
16 mm (4x)
Spacer
D
IMPORTANT:
Ensure that you have received all parts according to the component checklist prior to instal-
lation. If any parts are missing or faulty, telephone your local distributor for a replacement.
1. Mounting the Wall Plate
1.1 Wood Stud Installation
1. Place the wall plate against the wall with the hook
towards the bottom.
2. Secure the wall plate using one 2” wood screw (A).
3. Using the bubble level system (E), carefully adjust the
wall plate until it is level.
4. Attach the remaining 2” wood screw into the wall plate
and tighten.
Note: Using a wood stud finder, locate the stud centers
behind the wall. Once found, make a pencil marking on
the center of the wood studs.
Once the mark is made, it is strongly recommended that
a pilot hole be drilled with a 1/8” drill bit.