SCHUNK WBL 85 Balfour Beatty, Руководство по эксплуатации и обслуживанию

Страница: 30 / 56

Adjustment Work
Single Arm Pantograph WBL 85 Balfour Beatty
Page 30 WBL 85-15kV
Instructions:
❑
Remove the parallel guide bar from lower frame.
❑
Loosen lock nut (2).
❑
Adjustment is accomplished through screwing in or screwing out of the parallel
guide bar at the rod end (1).
❑
After adjustment tighten lock nut and re-check adjustment.
10.7. Adjust Turning of Pan Head
The adjustment of the panheadturning has to be made in medium workingheight of
the pantograph (about 1100 mm above resting position). By means of the adjustment
on the parallelguide, the contact strip surface (A) has to be adjusted to an exact
horizontal position. Measurement can by made by means of a spirit-level.
Rod End (1)
Lock Nut (2)
Contact Strip Surface (A)