SCHUNK VERO-S, Сборка и руководство по эксплуатации

Страница: 24 / 74

Assembly
24 03.00|WDP-5X |en
Assembly
Pre-assembly measures
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
• Before starting any work on the product: Switch off the power
supply and secure against restarting.
• Make sure, that no residual energy remains in the system.
CAUTION
Danger of injury due to sharp edges and rough or slippery
surfaces
• Wear personal protective equipment, particularly protective
gloves.
Check that the delivery is complete and that there is no transport
damage.
Assembly, dismantling and modification work on the workpiece
direct clamping module may only be carried out by specialist
personnel.
Disconnect the power supply lines and ensure that there is no
residual energy in the system before performing assembly,
modification, maintenance, or adjustment work.
Until the workpiece direct clamping module is assembled, access
to the side attachment screw of the clamping units must be
ensured, particularly when the clamping pallets are clamped.
Before installing, check whether the drive pistons and the
attachment screw can be easily reached for opening and for
clamping and loosening the interface connection on the workpiece
direct clamping systems respectively.
5
5.1