SCHUNK VERO-S, Сборка и руководство по эксплуатации

Страница: 49 / 74

Assembly
03.00|WDP-5X |en 49
Type ID
SPA 40-OB 0471631
SPB 40-OB 1316935
Workpiece direct clamping pins for compensation module
SPC-ASM 36
Clamping pin SPC-ASM 36 is compatible with compensation
module WDP-5X-ASM 99-70-Ø36. With this clamping pin,
individual heights can be adapted to the workpiece. The SPC-ASM
36 acts as a holding pin with centering clearance similar to
clamping pin SPC 40. In the compensation module WDP-5X-ASM
99-70-Ø36(-M), the clamping pin can be clamped axially to the
initial height in a limited extension range.
This enables height tolerances on the workpiece or also height
offsets to the additional clamping pillars to be compensated and
adjusted. Using this clamping pin, a small radial offset and an
angular deviation to the modular axis can be compensated.
The clamping pin SPC-ASM 36 should be used in combination with
the clamping pins VERO-S SPA 40 (centering pin) and SPB 40
(sword pin).
SPC-ASM 36 installation
Tolerances and installation conditions
Type ID A B C D E F G* H
SPC-ASM 36 0471616 > 12 > 17 M12 > 15 > 20 M10 20 >12
5.5
5.5.1