SCHUNK VERO-S NST3 400-250, Сборка и руководство по эксплуатации

Страница: 22 / 44

Assembly
22 02.00 | NST3 | VERO-S quick-change pallet system | en | 1344366
Reduced material
thickness in marked
areas
Reduced material
thickness in marked
areas
Bore holes permitted in shaded
areas
NST3 400-250
4.3.2 NST3 500-300
The clamping station is fastened to the machine table with size
M16 screws according to DIN EN ISO 4762 10.9. The mounting
points can also be screwed with M12 bolts and suitable washers.
The permissible drilling ranges for individually drilled holes in the
attached drilling drawings must be observed. There are two
alignment grooves on the bottom of the clamping station for
mounting loose T-nuts to be used for aligning the clamping
stations. These allow for precise alignment along an alignment
groove. Alignment to the machine table is also possible by
installing a centering pin and an alignment pin. The NST3 500-300
has two G1/8" connections for separate functions. One air
connection for unlocking and one air connection for the turbo
function. Supply is via the sealing nipple for locking couplings type