SCHUNK VERO-S NSP 140, Сборка и руководство по эксплуатации

Страница: 36 / 45

Troubleshooting
36 04.00|1400904 NSP 140, NSP-S 140 |en-US
Troubleshooting
The clamping area does not unlock
Possible cause Solution(s)
Defective hydraulic connections Check the hydraulic connections
Pressure below minimum Check the actuating pressure (at least 12 bar)
A component is broken (e.g. due to
overloading) Replace the module or send it to SCHUNK for
repair
Excess tensile load on clamping ring Reduce the tensile force/contact weight.
If the clamping area does not unlock perfectly
Possible cause Solution(s)
Pressure below minimum Check the actuating pressure (at least 12
bar)
Pipe diameter below minimum for required pipe diameters, see chapter
"General assembly notes"
The turbo connection is still pressurized Ventilate the connection
The quick-change pallet system is no longer opening quietly
Possible cause Solution(s)
The clamping faces on the clamping slides
and on the clamping ring are dirty Remove the clamping ring and clean the
clamping faces on the clamping slides and on
the clamping ring. In case of heavy wear, turn
the clamping ring.
10