SCHUNK TANDEM KRP3, Перевод оригинального руководства по эксплуатации

Страница: 6 / 48

General
6 01.00 | KRP3, KRP3-LH | TANDEM Clamping Block | en | 1514176
1.1.3 Applicable documents
• General terms of business *
• Catalog data sheet of the purchased product *
The documents labeled with an asterisk (*) can be downloaded
from
schunk.com .
1.2 Variants
This manual applies to the following variants:
• Clamping force amplification for O.D. clamping (AS)
• Pneumatic monitoring (PM)
• Jig-machined positioning bores (Z)
1.3 Warranty
If the product is used as intended, the warranty is valid for
24 months from the date of delivery from the production facility or
500 000 cycles* under the following conditions:
• Observe the applicable documents,
} 1.1.3 [
/
6]
• Observe the ambient conditions and operating
conditions, } 2.6 [
/
8]
Parts touching the workpiece and wear parts are not included in
the warranty.
* A cycle consists of a complete clamping process ("Open" and
"Close").
1.4 Scope of Delivery
Clamping force block
KRP3 or KRP3-LH
(without top jaws)
ACCESSORY KIT:
(for contents, see sealing kit list and parts list)
} 8.1 [
/
37]