Assembly and connection
When using top jaws type STR / STR-H / STR-S, define the bore
position according to the clamping position. Always observe
dimension E.
Use for cleaning the clamping surfaces
The customer can create channels in the top jaw in order to clean
the clamping and bearing surfaces by means of compressed air.
In doing so, the transfer dimensions ØC, D, E and F must be
observed.
Dynamic pressure monitoring of the workpiece flat work surface
For this purpose, the customer must provide the top jaw with a
Ø2 mm monitoring hole on the workpiece flat work surface.
This ensures that the escaping air purge can be released up to
where contact is made with the mounted workpiece and that a
differential pressure measurement can be carried out via a
differential pressure switch.
In doing so, the transfer dimensions ØC, D, E and F must be
observed.
Max. pressure 2 bar.
Limit volumetric flow to 10 l/min
25
01.00 | KRP3, KRP3-LH | TANDEM Clamping Block | en | 1514176
