SCHUNK TANDEM KRP3, Перевод оригинального руководства по эксплуатации

Страница: 30 / 48

Maintenance and care
30 01.00 | KRP3, KRP3-LH | TANDEM Clamping Block | en | 1514176
7.4 Maintenance work
7.4.1 Lubricate
CAUTION
Allergic reactions or irritation due to skin or eye contact with
lubricants on the product.
•
Wear protective equipment (protective gloves, protective
goggles) in case of foreseeable contact with lubricants on the
product (e.g. when lubricating or cleaning)
To maintain reliable function and high quality of the product, it has
to be regularly lubricated. This can be done with a hand lever press
for greases or by means of central lubrication.
Manual lubrication
• Press grease into the lateral supply lines
(6/7).
• Only lubricate in the open position.
• After greasing, run through the complete
stroke several times.
• Grease to be used and lubrication
intervals. } 7.3 [
/
30]
Size Grease quantity (strokes per grease nipple)
100 2
160 2
200 3
250 3
Central lubrication
• To use central lubrication, the set-screws of
the factory sealed connections (6, 7) must be
removed.
• For proper lubrication, both supply lines
must be connected.
• The central lubrication system must be
suitable for greases of NLGI 2 classification.
• Only lubricate in the open position.
• After greasing, run through the complete
stroke several times.
• Grease to be used and lubrication
intervals,
}
7.3 [
/
30]