SCHUNK STM 560V Series, Сборка и руководство по эксплуатации

Страница: 10 / 72

Basic safety notes
10 04/STM-560V/en/2010-12-10/SW
2.3 Controlled production
The module represents the state of the art and the recognized
safety rules at the time of delivery. However, it can present risks
if, for example:
•
The module is not used in accordance with its intended
purpose.
•
The module is not installed or maintained properly.
•
The EC Machinery Directive, the VDE directives, the safety
and accident-prevention regulations valid at the usage site, or
the safety and installation notes are not observed.
2.3.1 Protective equipment
When the module is in use, protective equipment must be used to
catch flying parts or to switch the drive into a safe mode should
the module or part of the module fail.
The protective equipment must comply with the requirements of
the EC Machinery Directive and IEC/EN 60204-1.
 The STM housing must be grounded via the converter by
means of the protective conductor in the power cable.
2.3.2 Constructional changes, attachments, or modifications
Additional drill holes, threads, or attachments that are not offered
as accessories by SCHUNK may be attached only with
permission of SCHUNK.
Non-authorized modifications results in the exclusion from
product liability.
2.3.3 After-sales service
SCHUNK's after-sales service is available for technical
information and questions concerning SCHUNK products.

Call the contact. (see chapter 15 page 71)
 State the ID of the module. (see chapter 6.1, page 19