SCHUNK SRU-plus-D, Сборка и руководство по эксплуатации

Страница: 52 / 72

Troubleshooting
52 04.00 | SRU-plus-D | Assembly and Operating Manual | en | 1380765
7 Troubleshooting
7.1 Product does not move smoothly to the end positions
Possible cause Corrective action
Dampening stroke shifted. Adjust absorber stroke.
}
5.4.3 [
/
39]
Shock absorber defective. Check or, if need be, replace the shock
absorber.
} 8 [ / 54]
7.2 Product does not travel through the rotating angle
Possible cause Corrective action
Accumulation of dirt between stop / sleeve
and pistons. Clean and lubricate product.
} 8 [
/
54]
End positions are adjusted incorrectly. Adjust end position.
}
5.4.1 [
/
35]
Pressure drops below minimum. Check air supply.
}
5.2.2 [
/
29]
Components have come loose e.g. due to
overloading. Send product with a SCHUNK repair order or
dismantle product.
Shock absorber defective. Check or, if need be, replace the shock
absorber.
}
8 [
/
54]
7.3 Product rotates jerkily
Possible cause Corrective action
Too little grease in the mechanical guiding
areas. Clean and lubricate product.
}
8 [
/
54]
Compressed air lines blocked. Check compressed air lines of damage.
Swiveling speed set too fast Adjust swiveling speed
} 5.4.2 [
/
38]