SCHUNK SRU-plus-D Скачать руководство пользователя страница 37

Страница: 37 / 72

Assembly

Version with limiting
sleeve

1. Loosen screw of the limiting sleeve (6) approx. one revolution.
2. Actuate air connection

(4).

3. Open exhaust throttle valve on air connection

(3) until the

pinion (5) starts to move.

✓

Pinion swivels towards the end position.

4. Set the desired end position by twisting the stop

(2).

5. Check end position.

✓

To do this, ventilate air connection

(4) and actuate it

again, if necessary adjust end position.

6. Ventilate air connection

(4) and actuate air connection

(3).

7. Open exhaust throttle valve on air connection

(4) until the

pinion (5) starts to move.

✓

Pinion swivels towards the end position.

8. Set the desired end position by twisting the stop

(1).

9. Check end position.

✓

To do this, ventilate air connection

(3) and actuate it

again, if necessary adjust end position.

10. Tighten screw (6).

✓

Tightening torque:SRU-plus-D 20-40: 10 Nm/SRU-plus-D
50-60: 24 Nm

11. Swivel repeatedly to test the setting, adjust if necessary.

04.00 | SRU-plus-D | Assembly and Operating Manual | en | 1380765

Содержание SRU-plus-D









































































Результаты поиска

Содержание SRU-plus-D

Отзывы:

SCHUNK SRU-plus-D, Сборка и руководство по эксплуатации, Страница: 37 / 72

Результаты поиска

Содержание SRU-plus-D

Отзывы: