SCHUNK SRU-plus-D, Сборка и руководство по эксплуатации

Страница: 42 / 72

Assembly
42 04.00 | SRU-plus-D | Assembly and Operating Manual | en | 1380765
5.4.5 Set locked center position
Depending on the start-up direction of stop A (11) or stop B (10),
the center positions can be set the same or differently.
1. Ventilate swivel unit.
2. Loosen screw (1) by approx. one revolution.
3. Actuate air connection
B (2).
✓
Swivel unit swivels to stop A (11).
4. Ventilate air connection B (2) and actuate air connection C (5).
✓
Stop C (3) locks.
5. Actuate air connection A (4).
✓
Swivel unit swivels to stop C (3), basic setting 90°.
6. Turn stop C (3) to the required center position.
7. Ventilate air connection C (5).
✓
Swivel unit swivels to stop B (10).
8. Ventilate air connection A (4) and actuate air connection D (7).
✓
Stop D (8) locks.
9. Actuate air connection B (2).
✓
Swivel unit swivels to stop D (8).
10. Turn stop D (8) to the required center position.
11. Tighten screw (1).
✓
Tightening torque: 20-40: 10 Nm/ 50-60: 24 Nm
12. Swivel repeatedly to test the setting, set again if
necessary, } 6.4 [ / 48] .