Maintenance
28
07.00 | PHL | Assembly and Operating Manual | en | 389508
6.3 Lubricants/Lubrication points (basic lubrication)
SCHUNK recommends the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
Lubricant point
Lubricant
Metallic sliding surfaces
Toothgood 1
Sliding surfaces within the
cylinder
Sealgood 1
All seals
Sealgood 1
Roller rail PHL 25
Mineral oil CLP (DIN 51517) ISO
VG 32 to ISO VG 150
Roller rail PHL 32 - 63
Bosch Dynalub 510
Depending on the load, the base jaws / carriages on the slide rail /
roller rail can be relubricated as well, via lubrication nipples. The
lubrication nipples can be used instead of the set-screw.
• The lubrication nipples can be used instead of the set-screw
(arrows).
• The carriages for the roller system in size 25 can be relubricated
using the openings at the front of the carriages.
• The carriages of the roller system in sizes 32 to 63 can also be
relubricated via a lubrication nipple.
