SCHUNK NSL3 turn 450-3, Сборка и руководство по эксплуатации

Страница: 25 / 54

Assembly
02.00|NSL3 turn 450-3, 450-3-Z, 570-5, 570-5-Z |en 25
• Pressure medium: Compressed air, compressed air quality
according to ISO 8573-1:7 4 4
The clamping station has two pneumatically actuated functions.
They can be actuated separately using an air connection with a
sealing nipple and locking coupling.
There is an air connection on both the unlocking connection and
the turbo connection. An additional coupling ring ensures that
these air connections do not fall out.
The locking coupling is connected to the external air supply. The
required size is in the clamping station's accessory pack.
CAUTION
The use of other (customer-owned) air connections can lead to
increased imbalance.
Increased imbalance could cause parts (workpieces) to come
loose and be expelled.
• The clamping station may only be operated with the installed
sealing nipples.
Unlocking connection
If the unlocking connection of the clamping station is actuated, all
the modules will be unlocked at the same time. Clamping pallets,
devices or workpieces can be removed from the clamping station,
or be inserted now.
Turbo connection
The clamping station has a turbo connection. When compressed
air is applied, this actively provides air pressure to support the
spring-actuated locking procedure. This increases the pull down
force in all the modules.
After a short pressure pulse from the compressed air supply, it can
be disconnected from the turbo connection again.
Technical data for the turbo connection can be found in the
chapter "Technical Data" in this
(

3, Page 21) Assembly and
Operating Manual for VERO-S quick-change pallet system NSE3
(

1.1.2, Page 6) .
4.3.1
4.3.2