Assembly
22
02.00|NSL3 turn 450-3, 450-3-Z, 570-5, 570-5-Z |en
Assembly
WARNING
Risk of injury due to dropping the clamping system during
transport
When transporting the module for stationary use/ application,
use the supplied eye bolts in the provided bore holes in the
baseplate.
When transporting use a crane and/or a trolley.
Wear protective clothing (gloves, safety shoes).
Disconnect the energy supply lines and ensure that there is no
residual energy in the system when performing assembly,
modification, maintenance, or adjustment work.
Mounting means are provided on the circumference of the base
plate and on the top side between the clamping modules.
The eye bolts must be removed before commissioning the
clamping station.
General assembly notes
When connecting the clamping station, ensure that it is possible to
completely bleed the piston chamber during the locking
procedure. The air connections on the clamping station are
provided with a bleed function.
When connecting to the air connection for unlocking, the system is
bled through the air connection for the turbo function. When the
air supply is attached to the turbo function, the system is bled via
the unlocking connection.
The connections for opening and turbo are actuated via a locking
coupling, which is included in the scope of delivery (accessory
pack). The actuating air must be attached to one connection only.
When attaching the hose line to the air supply, the air coupling
and the air connection for the clamping station must be free of
dirt.
4
4.1
