SCHUNK IndraDrive CS Series, Инструкции по вводу в эксплуатацию

Страница: 41 / 64

Commissioning
01.00|IndraDrive CS |en 39
Commissioning
Necessary tools & resources
The following tools & resources are needed to start up a drive with
an IndraDrive CS unit.
• a fully installed drive with an IndraDrive CS drive control unit
for connection schematics IndraDrive CS Connection diagram
IndraDrive CS
• PC with Ethernet TCP/IP interface
• IndraWorks operating software (from Version 08Vxx)
• Commissioning CD with the motor parameters and the files for
parameter selection.
Commissioning work
DANGER
Danger to life due to electric shock!
Touching live parts can cause death.
• Only professional electricians may carry out work on electrical
systems and equipment under compliance of the rules for
working with electrical systems.
WARNING
Risk of injury due to crushing and squeezing in unwanted
movement of the system!
Activating the “Automatic set up of the control circuit” command
can lead to a crash of the guided slide.
• Under no circumstances activate the automatic set up of the
control circuit for motors.
3
3.1
3.2