SCHUNK GSM-Z 38, Сборка и руководство по эксплуатации

Страница: 37 / 60

Commissioning
6.2 Setting the speed
CAUTION
Material damage due to erroneous settings!
If the end position is approached too hard, the product may be
damaged.
•
Adjust exhaust throttle valve and shock absorber so that the
movement is braked smoothly.
1. Close exhaust throttle valve completely.
2. Open exhaust throttle valve until the product starts to move.
3. Continue to open the exhaust throttle valve incrementally until
the movement decelerates smoothly.
✓
If the speed is too low, the product will brake too soon and
the end position will be reached too slowly.
✓
If the speed is too high, the product will impact against the
end position and the shock absorber will be overloaded.
6.3 Restart after long standstill
During a longer standstill, no compressed air may be applied to the
product.
If issues occur during the restart process, see
Swivel movement is
not executed immediately [
}
38]
37 06.00 | GSM-Z | Assembly and Operating Manual | en | 389110