Assembly
22
06.00 | GSM-Z | Assembly and Operating Manual | en | 389110
Item GSM - SFL basic size
40
64
4A
4B
4C
Thread diameter and max. depth of engagement for
screw connection for lateral mounting
M5
19 deep
Item 231
M6
25 deep
Item 231
5
Thread diameter for screwing through for mounting
the unit on the base side
M3
M5
6
Thread diameter and maximum depth of engagement
for screw connection for mounting on the base side
M4
8 deep
M6
11 deep
Mounting the unit
Mounting the unit on the base side
(with adapter plate similar to A, B or C; see "Mounting the GSM at
the side and on the base side")
The assembly of the unit can be carried out from the side of the
unit using the screws (6).
There are threads in the housings for mounting from the
customer-specific opposite side (screws 5 and 6 are not included in
the scope of delivery).
Use the centering sleeves (2) for the secure transmission of lateral
forces and the positioning of the unit.
Mounting the unit at the side
(with adapter plate similar to A, B or C)
The assembly of the unit can be carried out from the side of the
unit using the A2 screws included in the accessory kit (3A, 3B or
3C).
There are threads in the housings for mounting from the
customer-specific opposite side. (The A2 screws (4A, 4B or 4C) are
included in the accessory kit.)
Use the centering sleeves (1A, 1B or 1C) for the secure
transmission of lateral forces and positioning of the unit.
NOTE
In order to guarantee process reliability for monitoring with
magnetic switches, the adapter plate and the attachments located
near the unit in particular should be made of non-ferromagnetic
material. Otherwise, monitoring with magnetic sensors could be
impaired considerably.
NOTE
When monitoring with magnetic switches, the minimum distance
between the units must be 10 mm if multiple units are installed
next to each other.
