SCHUNK GSM-R 16, Сборка и руководство по эксплуатации

Страница: 40 / 52

Maintenance and care
40
04.00 | GSM-R | Assembly and Operating Manual | en | 389106
"O.D. gripping" version GSM-...-AS:
Disassembly
Ø
Repeat steps 1 to 11 of the gripper disassembly without main-
tenance of the gripping force
Version without maintenance of
gripping force [
}
38]. However, the bushing is item 46 and a
spring (121) is installed to maintain the gripping force.
Ø
Clamp the gripping module carefully between the cover housing
(35) and the bushing (46) when loosening the screws (111) since
the two parts are under spring tension.
Assembly
For assembly, observe the permissible tightening torques as well
as the greases and adhesives to be used
Screw tightening torques
[
}
37] and Grease/greasing areas [
}
36].
Ø
Repeat steps 1 to 14 of gripper assembly without maintenance
of gripping force
Version without maintenance of gripping force
[ } 38]. However, the bushing is item 46 and a spring (121) is
installed to maintain the gripping force.
Ø
With the variant with maintenance of the gripping force, make
sure the spring (121) is inserted in the bushing (46) between
steps 12 and 13 of assembly without maintenance of the
gripping force.
"I.D. gripping" version GSM-...-IS:
Disassembly
Ø
Repeat steps 1 to 11 of the gripper disassembly without
maintenance of the gripping force
Version without maintenance
of gripping force [ } 38]. However, the bushing is item 46 and a
spring (121) is installed to maintain the gripping force.
Ø
Clamp the gripping module carefully between the cover housing
(35) and piston (36) since the two parts are under spring
tension.
Assembly
For assembly, observe the permissible tightening torques as well
as the greases and adhesives to be used
Screw tightening torques
[
}
37] and Grease/greasing areas [
}
36].
Ø
Repeat steps 1 to 14 of gripper assembly without maintenance
of gripping force
Version without maintenance of gripping force
[
}
38]. However, the bushing is item 46 and a spring (121) is
installed to maintain the gripping force.
Ø
With the variant with maintenance of the gripping force, make
sure the spring (121) is put on the piston (36) between steps 9
and 10 of assembly without maintenance of the gripping force.