Maintenance
56
02.01|FDB 150, 300, 340, 660, 900, 1040 |en
9 If replacing the replacing the pivot bearing go to step 10. If re-
placing the entire rear housing go to step 23.
10 Remove the M4 socket head cap screws (3x) securing the piv-
ot bearing in the center of the rear housing.
11 Remove the large clamping washer which rests on top of the
pivot bearing.
12 Loosen the bearing preload set screw in the rear housing.
13 Remove the M5 set screws (2x) securing the pivot bearing key-
ing dowel in the rear housing.
14 Use a small diameter magnet or a powerful magnet attached
to the side of a hex key to reach inside the keying dowel pin
hole and remove the keying dowel pin from the rear housing.
15 With the keying dowel pin removed the old pivot bearing can
be pressed from the rear housing using a press tool.
