SCHUNK EGI 40, Сборка и руководство по эксплуатации

Страница: 7 / 52

General
03.00 | EGI | Assembly and Operating Manual | en | 1396645
7
1.2 Warranty
The warranty is 24 months or a maximum of 10 million cycles *
from the date of delivery from the production facility if used as
intended under the following conditions:
• Observe the ambient conditions and operating conditions,
Ambient conditions and operating conditions [
}
9]
• Observe the specified maintenance and lubrication intervals,
Maintenance [ } 47]
Parts touching the workpiece and wear parts are not included in
the warranty.
* One cycle consists of a complete gripping process:
"Open gripper" (release workpiece) and
"Close gripper" (grip workpiece).
1.3 Scope of delivery
The scope of delivery includes
• Gripper for small components EGI in the version ordered,
firmware
• Assembly and Operating Manual
• DVD
• EGI 40: 4x centering sleeve Ø5x4.35, 2x centering sleeve
Ø8x5.35
• EGI 80: 4x centering sleeve Ø6x5.35, 2x centering sleeve
Ø8x5.35
Contents of DVD:
• Software manual "EGI with PROFINET, EtherCAT or EtherNet/IP
interface"
• Assembly and Operating Manual
• Device description file
Note: For each fieldbus variant there is a separate device
description file.
1.4 Accessories
The following accessories, which must be ordered separately, are
required for the product:
• Power/logic connection cable
• Communication connection cable
• Adapter plate
• Gripper fingers
A wide range of accessories are available for this product
For information regarding which accessory articles can be used
with the corresponding product variants, see catalog data sheet.