Maintenance
03.00 | EGI | Assembly and Operating Manual | en | 1396645
47
8 Maintenance
8.1 Maintenance intervals
Interval
(million
cycles)
Maintenance work
2 / as
required
Clean the product dry with a lint-free cloth. Blow all
coarse dirt and chips out of the cavities in the
product with compressed air.
Inspect the product for damage. Replace the
product if necessary.
Have all repair work on the product carried out
only by SCHUNK.
Update firmware.
8.2 Disassembly and assembling
This product must not be disassembled for maintenance.
CAUTION
Material damage due to improper disassembly!
Incorrect works can cause damage to the mechanics and internal
electronics.
•
Disassembly or opening of the product is not permitted.
•
Only allow SCHUNK to repair the product.
