Maintenance
8.3 Disassembly and assembly
Disassembling
Remove debris shield
1. Lift tabs (1) and remove debris shield (2).
Disassemble the media feeder
2. Remove the sanding discs from the media feeder.
3. Loosen the fastening screws (1) and disassemble the alignment
rail (2).
4. Loosen the fastening screws (3) and remove the upper
plate (5) and feed tray assembly (8) from the media feeder.
5. Loosen the fastening screws (4) and remove the feed tray
assembly (8) from the upper plate (5).
6. Check retaining gasket (6) for damage and replace if necessary.
✓
Align the through hole on the retaining gasket (6) with the
through hole on the support bracket (7)
33
01.00 | AOV-MC | Assembly and Operating Manual | en | 1461420
