SCHUNK 1487783, Сборка и руководство по эксплуатации

Страница: 7 / 44

Fundamental Safety Instructions
2 Fundamental Safety Instructions
2.1 Intended Use
The Matrix-Plate (SMPL) forms a system with its accessories Steel-
Plate (ISST), FlexMat (SFM) and suction cups (ISBL) and is intended
exclusively for clamping workpieces on a CNC machining center. A
workpiece is secured to the clamping system by applying a vacuum
and can then be machined from five sides.
The clamping system must be used with an operating vacuum of
-750 mbar (guide value) Pneumatic Connection.
The product is intended for industrial use.
Intended use includes observing the technical data and the
installation and operating instructions in this manual.
2.2 Non-Intended Use
SCHUNK accepts no liability for damages caused by the use of the
clamping system for purposes other than those described under
“Intended Use”.
Non-intended use includes the following:
• In potentially explosive atmospheres
• Unauthorized refits
2.3 Danger Zone
Hazards arise when the clamping system is clamped to a machine
table and a workpiece is being processed.
Due to the function of the clamping system in connection with the
machine table and the tool in use, constant vibrations occur. As a
result, mechanical and fluid connections may loosen or even
become disconnected.
Measures for avoiding accidents:
• Ensure that no persons are present in the danger zone.
• Ensure that no persons enter the danger zone during operation.
CAUTION
Vacuum close to the eye
Severe eye injury!
•
Wear eye protection.
•
Do not look into vacuum openings such as suction lines and
hoses.
7 01 | SMPL with ISST, SFM and ISBL | Assembly- and Operating Manual | en-US |
1512656