SCHUNK 1487783, Сборка и руководство по эксплуатации

Страница: 20 / 44

Transport and Storage
20 01 | SMPL with ISST, SFM and ISBL | Assembly- and Operating Manual | en-US |
1512656
4 Transport and Storage
4.1 Checking the Delivery
The scope of delivery can be found in the order confirmation. The
weights and dimensions are listed in the delivery notes.
1. Compare the entire delivery with the supplied delivery notes
to make sure nothing is missing.
2. Damage caused by defective packaging or occurring in transit
must be reported immediately to the carrier and SCHUNK
GmbH & Co. KG.
The ISST-SMPL scope of delivery includes the following:
• Steel-Plate
• Sealing magnets (one per vacuum hole)
• Sealing gasket and screws
The ISST-SMPL SFM scope of delivery includes the following:
• Steel-Plate
• Sealing gasket and screws
4.2 Storage
If the products are not used immediately, we recommend storing
them horizontally in the transport packaging.
The following is generally recommended:
• Always store the Steel-Plate flat or horizontally, otherwise it
may deform.
• Store the FlexMat flat/horizontally. Do not bend or stress,
otherwise it may deform and become unusable.
The FlexMat, the seals and friction pads of the suction cups and
the sealing gaskets are made from elastomers.
Elastomer parts must be stored in a cool place (0° C to +15° C,
max. 25° C) that is dark, dry, low in dust and offers protection from
the weather, ozone and drafts. They must also be free of tension.
The effects of ozone, light (particularly UV), heat, oxygen and
humidity as well as mechanical influences can reduce the service
life of Suction Cups.
We therefore recommend storage in closed containers. Under
ideal storage conditions, the maximum storage period is 2 to 4
years (storage of elastomer parts in accordance with DIN 7716).