Schulze Big-O-Lite pneu plus, Инструкция по эксплуатации

Страница: 13 / 18

4.4 Replacing the power supply
To exchange the power supply, turn the press off and disconnect it from power first. Unscrew the cover of the press, as in chapter
4.4. Remove the stopper of the power supply (photo 1) and pull out the green plug (photo 2). Replace the power supply (photo 3).
Connect the green plug and fasten the power supply in the upper part of the press again. Then reassemble the press.
4.5 Replacing the electronic devices
Inside the upper part of the press there are electronic devices, which control the temperature and time of the press.
To exchange the electronic devices,
turn off the press and pull the plug.
Unscrew the cover of the press, as in chapter 4.4. Pull out the green plug (photo 1). Pull out the electronics keyboard (photo 2). Remove the
stopper of the electronic devices (photo 3) . Remove the electronic devices ((photo 4) . Connect the new electronic devices and fix them into the
press . Then reassemble the press again.
4.6 Replacing the electronics keyboard
To change the electronics keyboard the press must be switched off and unplugged.
Remove the front covers, as in chapter 4.4.
Disconnect the plug of the electronics keyboard from the electronics
(photo 1).
Remove the keyboard from the press (photo 2). Install a new keyboard and connect the plug to the electronics. Reassemble the press.
Version 16.01 13 / 18