Schulz CPS-40, Инструкция по эксплуатации

Страница: 29 / 40

29
ENGLISH
When using this product, basic safety precautions described in the SAFETY INSTRUC-
TIONS must be observed to reduce the risks and prevent personal or material damage to your equipment.
IMPORTANT
Congratulations for purchasing a Somar and Schulz product, marketed by Schulz Compressores Ltda.
2. INTRODUCTION
MAKE SURE TO READ AND FULLY UNDERSTAND THE INFORMATION CONTAINED IN THIS MA-
NUAL BEFORE OPERATING YOUR ELECTRICAL EQUIPMENT.
The plasma arc cutting equipment is a power source with IGBT (inverter) technology that promotes the cutting
of metals through an electric rim and compressed air. Plasma is heated to a high temperature, the gas is ionized
and becomes electrically conductive, capable of heating the material to the point of melting and cutting. Allows
the cutting of ferrous and non-ferrous materials.
The equipment’s working factor refers to the operating time at maximum current, considering a time interval of
10 minutes. In other words, the SCHULZ models have a 40% working factor, therefore, it is capable of operating
at maximum current for 4 minutes, requiring a 6-minute break to cool the equipment before starting a new job.
3. SAFETY INSTRUCTIONS
1.
The tool must not be used by children or people unfamiliar with its use;
2.
Do not use the equipment barefoot, in wet or very humid places, as this increases the risk of electric
shock;
3.
For protection against electric shock, it is recommended to install a residual current circuit
breaker. Consult an electrician to select and install this safety device;
4.
To reduce the risks of electric shock, when using your equipment, do not touch metal surfaces
attached to the ground or grounded, such as pipes, motors, gutters, fences, windows, doors, metal
gates, etc;
5.
Do not make splices in the cord. If required, ask for a power cord replacement at the nearest
Schulz Authorized Dealer ;
6.
Do not use your equipment while tired, under the infl uence of medication, alcohol or drugs. Lack of
attention during operation may result in serious personal injury;
7.
Always wear suitable Personal Protective Equipment (PPE), such as a welding mask, closed shoes
with non-skid rubber soles, and ear protectors. This reduces the risk of personal injury;