Schulte Titan 5000 II Series, Руководство оператора, Страница: 90 / 108

OPERATION
Titan 5000 Series II 01/22 Operation Section 4-28
© 2022 Alamo Group Inc.
OPERA
T
ION
To set the rock picker into transport position,
remove the Hitch Lock Pin. Using the tractor
hydraulics, Extend the Swing Hitch Cylinder. If the
pole does not swing freely, place a block in front of
the left tire and slowly drive to the right while
engaging the hitch cylinder hydraulics. When the
hitch is fully in Transport Position, reinstall the Hitch
Lock Pin and secure using the quick pin. Use of
lock pin is required with or without hydraulic swing
option.
Check local highway regulations concerning
moving machinery on highways. If the rock picker
obscures the tractor warning or tail lights, it must be
equipped with the Transport Light Kit S000-094.
Refer to Parts Manual
Two transport pins are provided on the grate as a
safety feature to be used while transporting the
machine on public roads. A quick pin is provided for
holding the transport pins in place. Refer to the
following illustration.
IMPORTANT: Remember to place the pin in the
storage position before operating the hydraulic lift
cylinders.
Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.
(SG-10)