Schulte FX-530 Скачать руководство пользователя страница 78

Страница: 78 / 170

OPERATION

FX-530 06/21

Operation Section 4-18

OPERA

TION

9. PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the implement and tractor must be performed.

This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped

and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection

reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing

parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time

and repair cost can be avoided.

OPS-U-0029

Always disconnect the main PTO Driveline from the Tractor before performing service on

the Implement. Never work on the Implement with the tractor PTO driveline connected and

running. Rotating Parts, or Drivelines could turn without warning and cause immediate

entanglement, injury or death.

(S3PT-11)

DO NOT

allow any person under a folded wing unless wing is securely

locked up or supported.

DO NOT

approach the Implement unless the

Tractor is turned off and all motion has ceased. Never work under the

frame work, or any lifted component unless the implement is securely

supported or blocked up. A sudden or inadvertent fall by any of these

components could cause serious injury or even death.

(STI-03)

Periodically inspect all moving parts for wear and replace when

necessary with authorized service parts. Look for loose fasteners, worn

or broken parts, and leaky or loose fittings. Make sure all pins have

cotter pins and washers. Serious injury may occur from not maintaining

this machine in good working order.

(SG-21)

Содержание FX-530











































































































































































Результаты поиска

Содержание FX-530

Отзывы:

Похожие инструкции для FX-530

Бренды по названию

Популярные бренды

Schulte FX-530, Руководство оператора

Результаты поиска

Содержание FX-530

Отзывы:

Похожие инструкции для FX-530

Бренды по названию

Популярные бренды