Schulte FX-530, Руководство оператора, Страница: 107 / 170

OPERATION
FX-530 06/21 Operation Section 4-47
© 2021 Alamo Group Inc.
OPERA
TION
14.1 Tires and Wheels
Laminated Sectional Tires are designed for conditions where puncture proof performance is required and the
mower will not be transported for long distances or at high speeds.
Foam Filled Aircraft Tires are also designed for conditions where puncture proof performance is required.
These tires provide better service where transporting is frequent and high speeds can be avoided.
Note:
Overheating a foam filled aircraft tire will cause the foam to liquefy and leak from the tire. The liquid will
not turn back to foam when tire is cooled down and your tire will once again be prone to punctures.
Pneumatic Aircraft Tires and Pneumatic Implement Tires are ideal for frequent long distance towing.
However, they are not puncture proof and are not recommended for mowing bushy areas or other conditions
that could damage tires.
All tires will generate heat during transport, some more than others depending upon tire construction. The
amount of heat build up in that tire is dependent upon the travel time. Caution must be taken to prevent any tire
from overheating. The tires should be checked periodically during transport. If the tires are beginning to
overheat they should be allowed to cool and the travel speed should be lowered.
Faster than recommended transport speeds during delivery of a machine to a customer or general transport
from job site to job site can cause serious tire damage and potential failure.
Please see chart below for tire speed ratings and recommended inflation pressures.
Before transporting the tractor on a public roadway
or boarding a trailer for transport, the tractor brake
pedals should be locked together. Locking the
pedals ensures that both wheels brake
simultaneously while stopping, especially when
making an emergency stop.
Use extreme caution and avoid hard applications of
the tractor brakes when towing heavy loads at road
speeds. Never tow the implement at speeds
greater than 20 MPH (32 kph).
OPS-U- 0018