Schulte FX-530 Скачать руководство пользователя страница 74

Страница: 74 / 170

OPERATION

FX-530 06/21

Operation Section 4-14

OPERA

TION

7.3 Leveling Wing

1. The center section height should be set before

adjusting the wing sections. Make sure the

tractor is completely shut down, the cutter is

completely lowered, and the cutter and tractor

are secured in position.

2. To set the inner wing section height, adjust the

1-1/4” threaded rod on the wing adjustment

assembly to level the wings of the cutter with

the center section.

3. To raise or lower wing, back off nut “A” first then

adjust nut “B”. Retighten nut “A” and lock

washer after adjustment. To lower the wing,

retract the threaded rod. To raise the

wing,extend the threaded rod.

4. After the wings are set at the desired position,

retighten jamnuts to maintain height settings

LEVELING WING SECTIONS WITH CENTER

5. To set the outer wings, adjust the turnbuckle on

the wheel linkage to level the outer wings with

the inner wings.

Содержание FX-530











































































































































































Результаты поиска

Содержание FX-530

Отзывы:

Schulte FX-530, Руководство оператора, Страница: 74 / 170

Результаты поиска

Содержание FX-530

Отзывы: