Schulte-Ufer GP 219, Инструкции по использованию и уходу

Страница: 26 / 28

Oils and fats
Attention:
Never use the pressure cooker for deep frying.
Please only use fats with a high smoke point for frying (observe manufacturer’s information). Only
fats and oils that do not break down under higher temperatures are suitable for frying, e. g.
clarified butter, concentrated butter, coconut, peanut oil or refined sunflower oil.
Attention:
The development of smoke indicates that fats are burning.
Native oils, e .g. cold-pressed olive or rapeseed oil, are not suitable for frying. These oils break
down under low temperatures and develop brown resin, so-called tar resin.
Rust film and extraneous rust
Particles of iron can be found everywhere in our environment, including in drinking water. If they
are sticking to the surface of the juice extractor, they may combine with moisture to develop rust
and cause damage. Rust film should be removed immediately with a suitable stainless steel
polish (chemist’s).
Limescale / tartar
Limescale deposits can be identified by matt white to dark grey spots in the cooking utensil. Lime-
scale deposits in the cooking utensil can easily be removed by citric acid, lemon juice or vinegar.
Pitting
Always only add salt to boiling water and pay attention to the complete dissolution of the salt
in the water. Cooking salt can lead to corrosion spots and permanent discolouration on the
base of the pot. Pitting is a purely visual change, has no effect on the cooking properties of the
cooking utensil and does not represent a reason for complaint.
Burnt food
Boil burnt food briefly with a tablespoon of bicarbonate of soda, baking powder or dishwasher
detergent and some water, and leave it to take effect overnight. Then rinse the pot thoroughly.
Please also note that many basic products such as stock cubes and finished products contain
tables salt, which contributes to the creation of pitting.
Reservation
We reserve the right to make appropriate or technically necessary changes to our products.
Dimensions, photographs and drawings serve solely as preliminary information for the customer
and require confirmation by us in order to be binding. Information about properties and per-
formance characteristics of our products are for illustration purposes only and are not binding.
26