Bedienungsanleitung/Operating Instructions
schuett phoenix II Sicherheits-Bunsenbrenner/Safety Bunsen Burner
Seite/page 6
Detail view
Front view from the top
(A) Main control (Joystick)
(B) Combined gas-air control
(C) Sensor (standard, accu)
(D) Display (standard, accu)
(E) Burner head
(F) Sparking electrode
Back
view
(G) Power connection
(H) Gas connection (1/4“ left-hand)
(I) Bracket for tilting the burner
(J) Rubber feet
(a) Nozzle for natural gas (gold)
(b) Nozzle for propane/butane gas (blue)
(G) Power connection
(H) Gas connection (1/4” left-hand)
(I) Bracket for tilting the burner
Bottom view
Display (standard, accu)
The display structure is consistent in all menus. The structure
is shown as an example for the operating mode “Sensor” as
follows:
(1)
Display operating mode
Hand, Foot, Sensor, Settings
(2)
Change of operating mode
Moving the joystick to the right or to the left
(3)
Setup – Changing to setup levels 1-4
Moving the joystick downwards
(4)
Menu – Returning to setup levels or to operating modes
Moving the joystick upwards
(5)
Display of digital burn-time
[min:s]
Adjustable in setup level 1
(7)
Graphical display of the digital burn-time
Circle of seconds
= 1 blue line equates to 1 s
Circle of minutes
= 1 green line equates to 2 min
(7)
Sensor activation
(only for operating mode “Sensor”)
(8)
Battery status
(only for phoenix II accu)
(9)
Remark “Hot burner head“
