Bedienungsanleitung/Operating Instructions
schuett phoenix II Sicherheits-Bunsenbrenner/Safety Bunsen Burner
Seite/page 22
Setting options of sensor features (standard, accu)
Go to operating mode “Sensor”.
Move the joystick downwards and choose the corresponding setup level.
Setup level 2 – Setting “Sensor activation” (1x operation or 2x operation)
The activation of the sensor is adjustable.
1x operation = one movement in front of the sensor activates the flame.
2x operation = two succeeding movements in front of sensor activate the flame.
1. Move the joystick to the right, if you wish to choose “2x operation“ or to the left
for “1x operation“, the arrow is highlighted in green colour.
2.
Confirm the setting by shortly pressing the centre of the joystick,
lights up in green colour.
Sensor indicator lamp for 1x operation
Sensor indicator lamp for 2x operation
= Burner is waiting for impulse
= Burner is waiting for impulse
= Ignition and operation
= First impulse has been recognized
= Ignition and operation
Setup level 3 – Setting of “Sensor sensitivity”
off
:
Sensor is switched off.
low:
Sensor is activated by touching the sensor field.
medium
:
Sensor responds up to a distance of approx. 3 cm.
high
:
Sensor responds up to a distance of approx. 8 cm.
In this position, the sensor even responds to moving an e.g.
inoculating loop or glass pipette in front of the sensor field.
1. Move the joystick to the right or left until the requested sensitivity is
displayed.
2.
Confirm the setting by shortly pressing the centre of the joystick,
lights up in green colour.
For setting “off“, the burner shows the following remark when operating mode
“Sensor” has been chosen:
Setup Level 4 – Setting “Sensor turns off flame”
For turning off the flame with a movement.
1.
Move the joystick to the right, if you wish to turn off the flame with the sensor
feature or move it to the left. The corresponding arrow is highlighted in green
colour.
2.
Confirm the setting by shortly pressing the centre of the joystick,
lights up in green colour.
