09
3. Settings.
3.3 Seat angle adjustment
In order to adjust the angle of the seat unit,
the hand trigger (
A
) at the rear below the seat
pan support must be actuated (by pulling it).
To do this, the rear part of the lever must be
pressed into the key lock. This deactivates the
child lock. The seat unit can now be adjusted
in an active or passive position.
It is possible if required to mount the release
lever (
B
) for the seat angle adjustment on the
push bar / handle or on the back of the seat
pan if used later.
When adjusting the seat angle, always
secure the seat pan with one hand!
3.4 Adaptation of seat pans
fridolin 1. & fridolin 2.
are prepared to carry
a seat unit / seat pan. The seat adapter
represents the connection point.
Seat pan adapter, standard:
Insertion of the seat adapter into the
seat pan support:
1. Insert the adapter into the rear tube
of the seat pan support.
2. Fold the adapter down to the front
tube. The lock will engage
automatically. Now tighten the
knurled knob (
C
) of the patented
closure.
3. When removing the seat pan, first
untwist the knurled screw on the adapter, and then pull on the knob to
release the connection between the adapter and the seat pan support.
Tilt the pan slightly and remove it.
Ensure that the patented closure is correctly engaged and that the knurled
knob is firmly tightened so that it can no longer be pulled!
A
B
C
